Rapid 6 Foam

A powerful, water-based, all-in-one solution for the rapid cleaning and disinfection of hard surfaces.

  tick green High grade sporicidal disinfection - works with existing cleaning practices
     
  tick green Proven effectiveness against spores, bacteria, mycobacteria & fungi - extensively tested to international standards
     
  tick green Also available as a wipe - use individually or in combination together
   
 

Shown to be effective against enveloped viruses

Tested to International Standard EN 14476 against H1N1 Swine Flu

 

Benefits

Rapid 6 Foam is a powerful, water-based solution for the rapid cleaning and disinfection of hard surfaces.  Specifically designed to work with existing cleaning practices to provide high grade sporicidal disinfection throughout medical settings.


Effective

Using a unique synergistic blend of surfactants, biocides, quaternary ammonium compounds and PHMB, Rapid 6 Foam provides targeted performance against:

  • Gram-positive bacteria
  • Gram-negative bacteria
  • Fungi
  • Mycobacteria
  • Enveloped viruses
  • Bacterial endospores

Independently tested using ‘real-world’ conditions and contact times, Rapid 6 Foam has also been tested and proven to provide 4 hour residual protection against bacteria & spores. 


Easy

Rapid 6 Foam provides a focused foaming spray which helps users clearly see the surface area where the foam is being applied. This helps ensure even and consistent surface coverage – which is important, as inadequate biocide application can lead to micro-organism cross resistance developing.

Ready to use and free from:

  • Alcohol
  • Peracetic acid
  • Chlorine dioxide

Rapid 6 Foam has no special PPE or storage requirements and is easy for all members of staff to use throughout the hospital.


Improved performance

Using Rapid 6 Foam in combination with Rapid 6 Wipes, the user is able to:

  • Extend the cleaning power and increase the performance of the wipe.
  • Reduce the possibility of bio-burden occurring.
  • Ensure uniform biocide application.

Rapid 6 Foam has also been tested with a range of other wipe materials, including detergent wipes and dry microfibre cloths, to demonstrate consistent and effective biocidal performance.

Find out more here.


Use biocides safely. Always read the label and product information before use.

Where to use

Rapid 6 Foam is designed for use on all hard surfaces (excluding medical devices) and can be used to disinfect areas and items such as:

  • Isolation rooms
  • Sluice rooms
  • Macerators
  • Walls & floors
  • Commodes
  • Laboratories
  • Blood spills
  • Bed frames & mattresses 
  • Steel gurneys
  • Work stations
  • Mortuaries
  • Bodily fluid spills
  • Dressing trolleys
  • Door handles 
  • Toilets, sinks & taps

Compatibility

Rapid 6 Foam has also been compatibility tested on different materials and shown to be suitable for use on, amongst others:

  • Steel
  • Wood
  • PVC
  • Cotton
  • Rubber
  • Polyester

Note: Rapid 6 Foam is designed for professional and industrial cleaning and disinfection purposes only. Not for domestic use or in publicly accessible areas. Not to be used on medical equipment. As with all disinfectants, gloves and appropriate PPE should be worn. Wash hands after use.

How to use

Available as a ready to use liquid - no dilution required.

  • Can be used with microfiber cloths, disposable tissues or detergent wipes.

  • Apply 2 or 3 foam bursts across the surface to be disinfected.

  • Wipe across the surface from clean to dirty, working towards you in straight ‘S’ shaped lines, ensuring all areas are adequately wetted.

  • Take care not to clean the same area twice. Always use a new wipe for a new surface.

  • Leave to dry naturally.

  • On food contact areas: leave for at least 5 minutes before rinsing surfaces with clean water.
     
 

Use with Rapid 6 Wipes to boost performance by up to 100 times!

Find out more here.

 

Note: Rapid 6 Foam is designed for professional and industrial cleaning and disinfection purposes only. Not for domestic use or in publicly accessible areas. Not to be used on medical equipment. As with all disinfectants, gloves and appropriate PPE should be worn. Wash hands after use.

International Standards

Rapid 6 Foam has been tested in accordance with the following European Standards:

  • Spores to EN 17126, EN 13704 and EN 14347 - against C.difficile, Bacillus cereus and Bacillus subtilis
  • Bacteria to EN 1276, EN 1040, EN 13697, EN 13727 and EN 14561 - against E.coli, E.hirae, ESBL E.coli, Klebsiella pneumoniae, Pseudomonas aeruginosa, Salmonella enteritidis, Salmonella typhimurium, Staphylococcus aureus, MRSA and VRE
  • Enveloped viruses to EN 14476 - against H1N1 Swine Flu
  • Fungi to EN 1650, EN 13697, EN 13624, EN 14562 and EN 1275 - against Aspergillus niger and Candida albicans
  • Mycobacteria to EN 14348 and EN 14563 - against Mycobacterium avium and Mycobacterium terrae
  • Practical testing - tested under real life conditions against C.difficile using different wipe applications: Rapid 6 Foam + Rapid 6 Wipes; Rapid 6 Foam + Endurocide Detergent Wipes; Rapid 6 Foam + microfibre cloths
  • Residuality test - against C.difficile and E.coli 4 hours after application

To download a summary of our test results, click or tap here.


For further information or to request copies of our test certificates, please contact us.

Pack sizes

500ml foaming trigger spray bottle

R6 500F

 quote button round
  • Order code
R6-F-500TS
  • Units per case
12 per case
   
       

1 Litre foaming trigger spray bottle

Rapid 6 Foam sporicidal surface disinfection 1 Litre quote button round
  • Order code
R6-F-1TS
  • Units per case
12 per case
 
     

5 Litre container

Rapid 6 5L small quote button round
  • Order code
R6-F-2X5 / R6-F-4x5
  • Units per case
2 per case / 4 per case
 

Downloads

Download our sales resources by using the links below:

PDF 32

 

PDF 32

Sales Sheet

 

Brochure

     
PDF 32  

PDF 32

Test Results

 

Brochure: Endurocide range

Back to top